HEAS Series 2-Way Mini Motorized Ball Valves

Mini dimension suit for small equipment Patented technology-floating seal structure.

Availability:

Quantity:



Inquire Add to Basket PDF Export

Model:
HEAS Series
Brand:
HEARKEN
Code:
HEAS2021001

Main Product FeaturesMini dimension suit for small equipment Patented technology-floating seal structure.

Long service life:80000-100000 circles.

Low working current,suitable for battery driving Manual override and position indicator.

Metal gearbox and POM gear

High flow capability

Actuation Capacitor Return Low voltage

Application

●HVAC

●Water treatment

●Chemical process

●Small equipment for automatic control

●Replacing solenoid valve, particularly when solenoid can't work reliably

Technical Parameter

Series	Max Torque	Operating time	Working Voltage	Max Power	Enclosure	Max Pressure	Medium Temperature	Ambient Temperature
HEAS-15	2.0N.m	5 Sec	DC3-6V AC/DC9-24C	<2W	IP65	1.0Mpa	0-90℃	-20℃<t<45℃
HEAS-15	1.5N.m	3 Sec	DC12V AC220V	<2W	IP65	1.0Mpa	0-90℃	-20℃<t<45℃
HEAS-15	1.5N.m	3 Sec	AC85-265V	<2W	IP65	1.0Mpa	0-90℃	-20℃<t<45℃
HEAS-60P	6.0N.m	Below 8 Sec	DC3-6V/12V	<5W	IP65	1.0Mpa	0-90℃	-20℃<t<45℃
HEAS-60P	6.0N.m	Below 8 Sec	AC/DC9-24V	<5W	IP65	1.0Mpa	0-90℃	-20℃<t<45℃
HEAS-60P	6.0N.m	Below 8 Sec	AC220V/ AC85-265V	<5W	IP65	1.0Mpa	0-90℃	-20℃<t<45℃

	Parts	Material
	Actuator housing	ABS
	Valve body	ABS
	Valve ball	ABS
	Stem	ABS
	Ball seat	PTFE
	Seal	EPDM

Valve size(mm)	Size	D1/D2	Φd	L1/L2	L3	F	A	B	C	H3	H2	H1	W (kg)
Both Female Screw (Full port)	DN15	G1/2"	15	13	57	27	66.5	55	16	48	46.5	27	0.37
	DN20	G3/4"	20	16	70	32	66.5	55	16	48	21.5	81	0.52
	DN25	G1"	25	20	82	38	66.5	55	16	48	21.5	81	0.68

WIRING
CR01 (2 WIRES)	CR02 (3 WIRES)	CR03 (3 WIRES)	CR04 (2 WIRES)	CR05 (5 WIRES)
Standard control	Two point control	One point control	Auto-return	Signal feedback
	INSTRUCTION FOR MANUAL OVERRIDE
	It is only permitted to use when power-off.
	Lift the hand-wheel, and turn it left or right until the valve is in place.
	When the black line on the indicator is horizontal, the valve is on; when vertical, the valve is off.

Testing For All Actuators

All actuators manufactured by HEARKEN are individually tested. Testing is carried out to check the leakage in both internal and external. The angle of rotation and Torque values. All bodies are stamped with year, month of production, size and serial number.

Click here to get more information about this product>>

Wiring Diagram

63-1 electrically operated valves

CR01 Voltage : DC3-6V/12V/24V

Connecting SW with OPEN (RED Wire connect with positive,Green Wire connect with negative), the valve opens, getting the pisition, motor automatically power off, the valve remains fully open position.
Connecting SW with CLOSE (Green Wire connect with positive,Red Wire connect with negative), the valve close, getting the pisition, motor automatically power off, the valve remains fully close position.

	CR02 Voltage : DC3-6V/12V/24V
	Connecting SW with OPEN the valve opens, getting the pisition,motor automatically power off, the valve remains fully open position. Connecting SW with CLOSE the valve close, getting the pisition,motor automatically power off, the valve remains fully close position. Noted: AC24C/AC220V can only be used for CWX-50K series electric valve.

	CR03 Voltage : DC3-6V/ADC9-24V/AC85-265V
	SW closed, the valve opens, getting the position, motor automatically power off, the valve remains fully open position. SW open, the valve close, getting the position, motor automatically power off, the valve remains fully close position. Note: When power is DC voltage, Red Wire is "+" and Blue Wire is "-"

	CR04 Voltage : DC3-6V/ADC9-24V/AC85-265V
	SW closed, the valve opens, getting the position, motor automatically power off, the valve remains fully open position. SW open, the valve close, getting the position, motor automatically power off, the valve remains fully close position.

63-5multi turn electric actuator

CR05 Voltage : DC3-6V/12V/24V

Connecting SW with OPEN, the valve opens, getting the position green wire output the OLS signal, the controller test the signal OLS, connect SW to STOP (power off the valve immediately), the valve stops and remains fully open position.
Connecting SW with CLOSE, the valve close, getting the position red wire output the CLS signal, the controller test the signal CLS, connect SW to STOP (power off the valve immediately), the valve stops and remains fully close position.
Note: Please make sure the signal wires "red", "black" and "greed" be connected at first, then connect the power wire "yellow" and "blue"